5-34 Installing the Operating System with Express SetupSetting for Solving ProblemsSetup the following issue in advance so that your computer can recover from any trouble preciselyand as soon as possible when it should occur.Memory Dump (Debug Information)This section describes the procedures for collecting memory dump (debug information) in theserver.IMPORTANT: Cautions for the Memory Dump The staff of maintenance service representative is in charge ofcollecting memory dump. Customers need only to specify thememory dump. If any trouble occur after specifying the process below, themessage to inform that the system is in short of virtual memorymay appear, but continue to start the system. If you re-start thesystem in such case, memory dump may not be stored correctly.Follow the procedure below to specify.1. Point to [Settings] in Start menu and click [Control Panel].The [Control Panel] dialog box appears.2. Double-click [System].The [System Properties] dialog box appears.3. Click [Advanced].4. Click [Startup and Recovery].5. Enter the location to write the debug information to the text box.e.g. Write the debug information in D drive with the file name "MEMORY.DMP".D:\MEMORY.DMP
