2-102 Command Line Interface Commands ReferenceThe tag (i.e., name) of the DLCI defaults, in this case, to “DLCI 17”. To specify a different name, type:frame-relay dlci 17 tag "My DLCI"For descriptions of the other parameters available for configuration (and their default values) see the MotorolaNetopia® Router User’s Reference Guide.no frame-relay dlci numberThis command deletes the DLCI identified by number.frame-relay lmi type { none | annexa | annexd | ansi | ccitt | lmi }no frame-relay lmi typeshow frame-relay lmi typeThese commands allow you to change or display the Frame Relay Local Management Interface (LMI) type. Thekeywords ccitt and annexa are synonyms, as are the keywords ansi and annexd.frame-relay tim { none | standard | buffered }This command allows you to set the routers’s Frame Relay transmit injection management tim.show frame-relay lmi statisticsThis command displays Frame Relay Local Management Interface (LMI) statistics.Example:#show frame-relay lmi statisticsLMI Tx Status Enquiries: 10LMI Rx Status Responses: 10LMI Timeouts: 0LMI Errors: 0LMI Failures: 0show frame-relay pvcThis command displays the status of each Frame Relay permanent virtual circuit (pvc).Example:#show frame-relay pvcDLCI: 16, status: activeDLCI: 17, status: active
