2-42 Command Line Interface Commands Referenceinterface ethernet 0 address-serve netbios scope name domain-nameshow interface ethernet 0 address-serve netbios scope nameThese commands allow you to set or show the domain name under which the NetBIOS scope is enabled.interface ethernet 0 address-serve netbios name-server enable { yes | no }no interface ethernet 0 address-serve netbios name-server enableshow interface ethernet 0 address-serve netbios name-server enableThese commands allow you to set, delete, or show whether a NetBIOS name server address is served toNetBIOS clients.interface ethernet 0 address-serve netbios name-server address xxx.xxx.xxx.xxx [secondary]show interface ethernet 0 address-serve netbios name-server addressThese commands allow you to set or show the IP address of the NetBIOS name server.If the keyword secondary is specified and there is no primary WINS server the command will be rejected asCLI_NO_CFG_SUPPORT_ERR, with the error message "; error 2: not supported with current configuration“.
