Motorola Netopia® Router CLI Commands 2-125ike phase1 { name | index } [ { yes | no } ]no ike phase1 { name | index }show ike phase1 { name | index }These commands create, delete, or show the specified IKE Phase1 profile, which may be identified by index orby name. The show version of this command displays the value yes if the specified IKE Phase 1 Profile exists,and no otherwise.show ike phase1 { name | index } idThis command displays the index of the specified IKE Phase1 profile. This command is useful only whenreferring to a profile by name.Global IPSec Configuration Commandsike phase1 { name | index } independent rekeys { yes | no }show ike phase1 { name | index } independent rekeysno ike phase1 { name | index } independent rekeysike phase1 { name | index } initial-contact { yes | no }show ike phase1 { name | index } initial-contactno ike phase1 { name | index } initial-contactike phase1 { name | index } negotiation { normal | initiate-only | respond-only }show ike phase1 { name | index } negotiationike phase1 { name | index } pfs { yes | no }show ike phase1 { name | index } pfsno ike phase1 { name | index } pfsike phase1 { name | index } port policy { "strict" | "permissive" }show ike phase1 { name | index } port policyike phase1 { name | index } sa lifetime { seconds | kbytes } { non-negative-integer | none }show ike phase1 { name | index } sa lifetime [ { seconds | kbytes } ]no ike phase1 { name | index } sa lifetime [ { seconds | kbytes } ]ike phase1 { name | index } sa use-policy { new-sas-immediately | old-sas-until-expired }show ike phase1 { name | index } sa use-policyike phase1 { name | index } vendor-id { yes | no }show ike phase1 { name | index } vendor-idno ike phase1 { name | index } vendor-id
