Motorola Netopia® Router CLI Commands 2-87wireless enable [ yes | no ]show wireless enableThese commands allow you to enable, disable, or show the status of the wireless option. When disabled, therouter will not provide or broadcast any wireless LAN services.wireless closed-system [ yes | no ]show wireless closed-systemThese commands allow you to enable, disable, or show whether the WLAN is operating as a closed-system.Enabling closed system mode will hide the wireless router’s broadcast of the SSID, which prevents its namefrom appearing on a wireless client when they scan for access points. Therefore, in order to connect, thewireless client would already have to know the SSID. This prevents casual intrusion. Default is no.Wireless Configuration Commands (continued)wireless enable [ yes | no ]show wireless enablewireless closed-system [ yes | no ]show wireless closed-systemwireless ssid stringshow wireless ssidwireless auto-channel [ off | at-startup | continuous ]no wireless auto-channelshow wireless auto-channelwireless default-channel [ no 1..14 ]show wireless default-channelwireless wep [ enable | disable ]show wireless wepwireless default-keyid [ 1..4 ]show wireless default-keyidwireless wep encpt-key [ 1..4 ] hex_stringno wireless wep encpt-key hex_stringshow wireless wep encpt-key [ 1..4 ]
