2-36 Command Line Interface Commands ReferenceVirtual LAN (VLAN) configuration commandsNote: See also “RADIUS Authentication Profile configuration commands” on page 2-39 and “Additional LANconfiguration command” on page 2-16.vlan id by [ port-based | global ]no vlan idThese commands allow you to create or delete a VLAN specified by id and designate it either port-based orglobal. You can create up to 16 VLANs.VLAN Configuration Commandsvlan id by [ port-based | global ]no vlan idvlan id name namevlan id network { none | lan | eth2 | eth3 | eth4 | eth5 | eth6 | eth7 }vlan id id { 1 .. 4094 } (supported in V8.6.1)vlan id 8021x authprofile { authprofile tag name | authprofile id }no vlan id 8021x authprofilevlan id interface eth { 1 | 2 | 0/1 | 0/...n } tag { yes | no }[ tos-priority { off | on -} ][ iptos-promote { off | on } ][ authprofile { name | id } ][ inter-vlan-routing { group-1... group-8 } enable { yes | no } ]no vlan id interface eth { 1 | 2 | 0/1 | 0/...n }vlan id interface ssid n tag { yes | no }no vlan id interface ssid nvlan id interface usb 0 tag { yes | no }no vlan id interface usb 0vlan id interface cp n tag { yes | no }no vlan id interface cp nshow config vlan { id }
