3-24 Command Line Interface Commands Referencecp { name | index } gre checksum [ yes | no ]show cp { name | index } gre checksum [ yes | no ]These commands allow you to enable, disable, or show whether a GRE tunnel will transmit a checksum field onoutgoing GRE packets, when enabled. The Router will implicitly check incoming GRE packets with a checksumvalue.cp { name | index } gre sequence-datagrams [ yes | no ]show cp { name | index } gre sequence-datagrams [ yes | no ]These commands allow you to enable, disable, or show whether a GRE tunnel will transmit sequence numberson outgoing GRE packets, when enabled. Also specifies that the GRE tunnel will check an incoming GREpacket’s sequence number field for out-of-sequence ordering and buffering. When disabled, the CPE will notsend sequence numbers; and it will consider all inbound packets to be in-sequence (i.e. not check the “S” bitflag, if set).cp { name | index } gre key [ 0..232-1 ]show cp { name | index } gre key [ 0..232-1 ]These commands allow you to specify or show a 32-bit integer key value assigned to the GRE tunnel; if zero,the tunnel is considered not to have a key identifier. It will not set the “K” bit in the GRE header, and ignore anykey value received from the peer. If non-zero, the received key field value (if present in the GRE header) will bechecked against the local tunnel value, and discarded if the comparison fails. If non-zero, all outbound GREheaders will include this value in the Key Field.CompuServe LoginCompuServe Login Connection Profile Commandscp { name | index } telco compuserve login { yes | no }show cp { name | index } telco compuserve loginno cp { name | index } telco compuserve logincp { name | index } telco compuserve hostname stringshow cp { name | index } telco compuserve hostnameno cp { name | index } telco compuserve hostnamecp { name | index } telco compuserve username stringshow cp { name | index } telco compuserve usernameno cp { name | index } telco compuserve usernamecp { name | index } telco compuserve password stringno cp { name | index } telco compuserve password
