2-62 Command Line Interface Commands ReferenceT1 WAN Interface configuration commandsT1 WAN Interface Configuration Commandsinterface t1 id buildout { auto | 0-0.6 | 7.5 | 15.0 | 22.5 }show interface t1 id buildoutinterface t1 id channelscount integer[ start integer ][ { alternating | contiguous } ][ rate { 56 | 64 | 56k | 64k | Nx56k | Nx64k } ]show interface t1 id channelsinterface t1 id clock source { internal | network }show interface t1 id clock sourceinterface t1 id dle { ppp | hdlc | rfc1490 }show interface t1 id dleinterface t1 id ds0-autodetect { yes | no }show interface t1 id ds0-autodetectno interface t1 id ds0-autodetectinterface t1 id framing { d4 | esf }show interface t1 id framinginterface t1 id encoding { ami | b8zs }show interface t1 id encodinginterface t1 id operation line type { normal | copper-mountain }show interface t1 id operation line typeinterface t1 id prm-enable { yes | no }show interface t1 id prm-enableno interface t1 id prm-enableinterface t1 id rfc1973 enable { yes | no }show interface t1 id rfc1973 enableno interface t1 id rfc1973 enable
