S e t t i n g s50 Copyright © 2005 Nokia. All rights reserved.4. Press the end key to return to thestandby mode screen; then enterthe phone number, including anyprefix (such as 0 or 1) that yourcalling card may require whenyou make a calling card call. Seeyour calling card for instructions.5. Press and hold the call key for afew seconds until Card call isdisplayed.6. When you hear the tone orsystem message, select OK.International prefixInternational prefix options arecarrier dependent.You can store an internationaldialling prefix into your device.When you enter + at the beginningof a phone number, your deviceautomatically inserts theinternational dialling prefix that youhave stored.1. In the standby mode, select Menu> Settings > Call settings >International prefix.2. Enter the international diallingprefix (for example, 0011) andselect OK.3. In the standby mode, press *twice to use + and enter thephone number you wish to call,for example, +3546789.The device dials the internationaldialling prefix you have stored inyour device and the phonenumber you have entered (forexample, the device dials00113546789).Data and fax callsData or fax calls is a network service.See "Network Services", page 9.If your wireless network operatorsupports this feature, you can set upthe device to send or receive data orfax calls when a terminal, such as aPDA or PC, is connected.For better performance during datacalls, place the device on astationary surface. Do not move thedevice by holding it in your handduring a data call.For more information onconnectivity, see the PC/PDAConnectivity Guide. The PC/PDAConnectivity Guide can bedownloaded from the Nokia web siteat http://www.nokia.com/us.1. In the standby mode, select Menu> Settings > Call settings > Data/fax calls > Incoming data/fax calland one of the following options:Normal—The device receivesincoming calls as usual.