114 Configuring a 2370, 2360, or 2380 Switch for Basic Service320656-AThe following command applies radio profile rp1 to radio 2 on AP access ports 1, 2, and 4 and on DistributedAP 1 and enables the radios:2370# set ap 1,2,4 radio 2 radio-profile rp1 mode enablesuccess: change accepted.2370# set dap 1 radio 2 radio-profile rp1 mode enablesuccess: change accepted.Displaying Radio Configuration InformationTo verify radio configuration changes, use the following commands:show ap config [port-list [radio {1 | 2}]]show dap config [dap-num [radio {1 | 2}]]Here is an example:2370# show ap config 1Port 1: AP model: 2330, POE: enable, bias: high, name: MP01boot-download-enable: YESload balancing group: noneRadio 1: type: 802.11g, mode: disabled, channel: 6tx pwr: 15, profile: defaultauto-tune max-power: default, min-client-rate: 5.5, max-retransmissions: 10Radio 2: type: 802.11a, mode: disabled, channel: 36tx pwr: 11, profile: defaultauto-tune max-power: default, min-client-rate: 24, max-retransmissions: 10Configuring Mobility Domain ParametersA Mobility Domain is a collection of WSSs that work together to support a roaming user. A user can roamacross the network from one WSS to another while maintaining the same IP address and session.Each Mobility Domain has one seed member that maintains a list of the system IP addresses of all themembers. Nonseed members communicate with the seed initially to retrieve and store the IP connectivityinformation of other WSSs, and subsequently if configurations of member switches change or switches areadded or deleted. For normal operation, the seed switch need not be available for the rest of the MobilityDomain to function.Note. All WSSs in a Mobility Domain use their system IP addresses as a basis tocommunicate. To support the services of the Mobility Domain, the system IP address ofevery WSS in a Mobility Domain requires basic IP connectivity with the system IPaddresses of all other WSSs in the Mobility Domain. (For configuration information, see“Specifying a System IP Address” on page 100.)
