WLAN—Security Switch Overview 27WLAN—Security Switch 2300 Series Installation and Basic Configuration GuideStatus LEDsThe WSSs have LEDs that indicate port, power, and CPU status.2360, 2380, and 2370 LEDsTable 2 lists the LEDs for models 2370, 2360, and 2380..Table 2: WSS Status LEDs—2370, 2360, 2380LED Appearance MeaningMgmt(2370 and 2380 only)Bright green, then fade(repeated)Note: This LED appearanceis sometimes calledbreathing.WSS is operating normally.Blinking green WSS is booting.Quickly blinking amber WSS was unable to boot completely.Power supply status Solid green DC power output is on.Solid amber Power fault has occurred.Unlit AC power is off.Gigabit fiber linkactivity(2370 and 2380 only)Solid green 1000-Mbps fiber link is operational.Blinking amber (2370) Traffic is active on the 1000-Mbps fiber link.Blinking green (2380) Traffic is active on the 1000-Mbps fiber link.Gigabit copper linkactivity(2370 and 2380 only)Solid green 1000-Mbps copper link is operational.Blinking green Traffic is active on the 1000-Mbps copperlink.Link(2370 and 2360 only)Solid green 100-Mbps link is operational.Solid amber 10-Mbps link is operational.Blinking green Traffic is active on the 100-Mbps link.Blinking amber Traffic is active on the 10-Mbps link.