Configuring PoE using web-based management 169Item DescriptionDTE PowerConsumptionDisplays total power use on all devices currently drawing power.DTE PowerUsage ThresholdEnter the percentage of total power consumption on the switch necessary totrigger a trap.The default value is 80%.Power Pair Displays the power pair of the RJ-45 pin connectors that supplies the power.The only available option for the Ethernet Routing Switch 2500 Seris is Signal.ATTENTIONEnsure that the power pair used by the IP devices you are poweringmatches the power pair for the Ethernet Routing Switch 2500 Series.Traps Control Choose to enable or disable trap from agent.PD Detect Type Choose the type of power detection you want for the switch:• 802.3af• 802.3af and legacyThe default is 802.3af.ATTENTIONEnsure that the power detection method you choose for the EthernetRouting Switch 2500 Series matches that used by the IP devices you arepowering.Power SourcePresentThis display-only field displays the current power supply for the switch:• AC Only--using only the internal power source of the switchAC Power Status Displays the current status of AC power on the switch.DC Power Status Displays the current status of DC power on the switch (Not Present).2 Type the information, or make a selection from the list.3 Click Submit.—End—Nortel Ethernet Routing Switch 2500 SeriesOverview — System ConfigurationNN47215-500 (323162-B) 02.02 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
