86 CLI BasicsYou can also use the unit/port convention with a standalone EthernetRouting Switch 2500 Series as long as the unit number is 1.Accessing CLIYou access the CLI using Telnet or through a direct connection to the switchfrom a terminal or personal computer (PC). You can use any terminal or PCwith a terminal emulator as the CLI command station. Make sure that theterminal has the following features:• 9600 bits per second (b/s), 8 data bits, 1 stop bit, no parity, no flowcontrol• Serial terminal-emulation program such as Terminal or Hyperterm forWindows* 95, Windows 98, Windows 2000, Windows XP or WindowsNT*• Cable and connector to match the male DTE connector (DB-9) on theEthernet Routing Switch 2500 Series Console port, with the DCE/DTEswitch on the switch management module set to DTE• VT100 Arrows checked in the Terminal Preferences window underTerminal Options, and Block Cursor unchecked; VT-100/ANSI checkedunder EmulationTo access CLI, use the following procedure:Step Action1 When you access the Ethernet Routing Switch 2500 Series, thefollowing banner appears.Ethernet Routing Switch 2500 Series banner2 Press Ctrl+Y, and the CLI prompt appears.2500>Nortel Ethernet Routing Switch 2500 SeriesOverview — System ConfigurationNN47215-500 (323162-B) 02.02 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
