Downloading switch images 329The following table describes the fields on the Software Downloadpage.Table 146Software Download page fieldsFields Range DescriptionCurrent Running Version The version of the current runningsoftware.Local Store Version The local version of the software in theflash memory.Software Image Filename 1..30 Type the software image file name.Diagnostics Filename 1..30 Type the diagnostics file name.TFTP Server IP Address XXX.XXX.XXX.XXX Type the IP address of your TFTP loadhost.Download Option NoSoftware ImageDiagnosticsSoftware Image If NewerDownload without resetChoose the software download option.2 Type information in the text boxes, or select from a list.3 Click Submit.The software download process automatically completes withoutuser intervention. The process erases the contents of flash memoryand replaces it with a new software image. Take care not to interruptthe download process until after it runs to completion (the processcan take up to ten minutes, depending on network conditions).Unless you choose the Download without reset option, the switchautomatically resets after the download process is complete. Thenew software image then initiates a self-test.During the download process, the Ethernet Routing Switch 2500Series is not operational. You can monitor the progress of thedownload process by observing the LED indications.—End—The following table describes the LED indications displayed during thesoftware download process.Nortel Ethernet Routing Switch 2500 SeriesOverview — System ConfigurationNN47215-500 (323162-B) 02.02 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
