300 Configuring the switch using Device ManagerOrganizational Defined Info tabWith the Organizational Defined Info tab, you can view organizationallyspecific properties for the remote system.Use the following procedure to open the Organizational Defined Info tab:Step Action1 From the Device Manager menu bar, choose Edit > Diagnostics >802.1ab > LLDP.The LLDP dialog box appears with the Globals tab displayed.2 Click the Organizational Defined Info tab.The Organizational Defined Info tab appears.Figure 109Organizational Defined Info tabThe following table describes the Organizational Defined Info tabfields.Table 137Organizational Defined Info tab fieldsField DescriptionTimeMark The TimeFilter for this entry.LocalPortNum Identifies the local port on which the remotesystem information is received.Index An arbitrary local integer value usedby this agent to identify a particularMSAP. An agent is encouraged to assignmonotonically increasing index values tonew entries, starting with one, after eachreboot.OrgDefInfoOUI The Organizationally Unique Identifier(OUI), as defined in IEEE 802-2001, is a 24bit (three octets) globally unique assignednumber referenced by various standards,of the information received from the remotesystem.Nortel Ethernet Routing Switch 2500 SeriesOverview — System ConfigurationNN47215-500 (323162-B) 02.02 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.