Nortel 2500 Series System Configuration Manual

Also see for 2500 Seriess: Installation hardware Documentation roadmap

Contents

Nortel 2500 Series System Configuration Manual Manual pdf 83 page image

CLI command modes 83Figure 23CLI command mode hierarchyYou can see a specific value for each command mode at the prompt line,and you can use specific commands to enter or exit each command mode(Table 9 "Command mode prompts and entrance/exit commands" (page83)). Additionally, you can only enter command modes from specific modesand only exit to specific command modes.Table 9 "Command mode prompts and entrance/exit commands" (page83) describes the command mode prompts and entrance/exit commands.Table 9Command mode prompts and entrance/exit commandsCommandmodeSample Prompt forthe EthernetSwitch 2500Enter/exit commandUser EXEC(exec)2500T> Default mode, automaticallyenterlogout or exit to quit toMain MenuNortel Ethernet Routing Switch 2500 SeriesOverview — System ConfigurationNN47215-500 (323162-B) 02.02 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.