314 Administering the switch using web-based managementTable 141Items on the Quick Start pageSection Item DescriptionIn-Band SwitchIP AddressSpecify a new IP address for theswitch.In-Band SubnetMaskEnter a new subnet mask.IPDefaultGatewaySpecify an IP address for thedefault gateway.Read-OnlyCommunityStringSpecify a character string toidentify the community string for theSNMPv1 Read-Only community,for example, public or private.Re-enter character string to verify.The default value is public.CommunityStringRead-WriteCommunityStringSpecify a character string toidentify the community string for theSNMPv1 Read-Write community,for example, public or private.Re-enter character string to verify.The default value is private.Index Select the number of the TrapReceiver to create or modify.IP address Specify the network address for theSNMP Manager that is to receivethe specified Trap.Trap ReceiverCommunity Type the Community String for thespecified Trap Receiver. Re-enterCommunity String to verify.VLAN Quick StartVLANSpecify the IP of the port-basedQuick Start VLAN.—End—Configuring system securityFor information on configuring system security, please see Nortel EthernetRouting Switch 2500 Series Security — Configuration and Management(NN47215-505).Nortel Ethernet Routing Switch 2500 SeriesOverview — System ConfigurationNN47215-500 (323162-B) 02.02 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
