Switch management features 67You can also set the CLI password using the cli password command,or the Password Setting web-based management page. When you log onto the switch, you are prompted to enter a valid user name. Therefore,ensure you are aware of the valid usernames (default RW and RO) beforeyou change passwords.For the standard software image, the default password for user RO is "user"and for user RW is "secure". For the secure software image, the defaultpassword for RO is "userpasswd" and for RW is "securepasswd".For more information about this and other advanced security featuressupported on the Ethernet Routing Switch 2500 Series, see Nortel EthernetRouting Switch 2500 Series Security — Configuration and Management(NN47215-505).Logging inIf you set a password using the username or cli password command,the next time you access the switch, you are prompted for a usernameand password as shown in Figure 21 "Login screen" (page 67) (defaultusernames are RW and RO).Figure 21Login screenEnter a valid user name and password and press Enter. You are thendirected to the CLI.For the standard software image, the default password for user RO is "user"and for user RW is "secure". For the secure software image, the defaultpassword for RO is "userpasswd" and for RW is "securepasswd".Nortel Ethernet Routing Switch 2500 SeriesOverview — System ConfigurationNN47215-500 (323162-B) 02.02 Standard4.1 19 November 2007Copyright © 2007, Nortel Networks.
