Page 832 of 1814 ISDN PRI Central Office Connectivity553-2901-301 Standard 9.00 January 2002- ENTRY aaaaXaaaaXaaaa Xbbbbaaaa = CLID entry to be configured.Xaaaa = CLID entry to be deleted.Xaaaa Xbbbb = CLID entries to be deleted.aaaa and bbbb must be a value between 0 and (SIZE-1).The ENTRY prompt is repeated until is entered as aresponse.If REQ = CHG, as many entries as needed may be created,changed or deleted. The action for the entry is saved tosystem memory after the CLID entry has been completelyconfigured. That is, after the LSC prompt has beenanswered. If a new CLID entry is created, or an existingCLID entry is changed, the message “ENTRY aaaaSAVED” is displayed after the LSC prompt. If a CLID entryor CLID entries is/are deleted, the message “ENTRY aaaaDELETED” or “ENTRIES aaaa-bbbb DELETED” isdisplayed after the LSC prompt.- - HNTN 0-999999 National code for home national number (1-6 digits).- - HLCL 0-999..9 Local code for home local number or Listed DirectoryNumber (1-12 digits).- - DIDN(YES)NOSRCHHow to use the DN as a DID when constructing a CLIDnational or local number.The CLID is constructed using the digits defined in HLCLfollowed by the DN of the active key (default).Construct the CLID using the digits defined in HLCL.Search on the set, from key 0 - upwards, to find a CLIDentry which has the DIDN set to YES. Use the found CLIDto construct the local number.- - HLOC 0-9999999 Home location code (ESN), 1-7 digits.- - LSC 0-9999999 Local steering code, 1-7 digits.ISDN YES Integrated Services Digital Network.- PNI 1-327000 Private Network Identifier.ENTRY aaaa SAVEDENTRY aaaa DELETEDENTRIES aaaa-bbbb DELETEDDisplayed message appears after each entry is input.
