142 Chapter 3: Link maintenance commands553-3211-510 Standard 1.0 October 1998untrace linkUse untrace link to turn off a trace that was initiated by the trace linkcommand.Command format:mlusr> untrace link link_numberuntrace mainThe untrace main to turn off a trace that was initiated by the trace maincommand.Command format:mlusr> untrace mainUse the view command to see the trace file. (See the view command laterin this chapter for more information on selecting and viewing files.) Thefollowing are examples of trace messages in trace files.Example: trace main05/20/92 20:41:37 to MLappl (assoc id=1) Trace Tsmain ResponseFF 0A 00 0D 01 80 04 09 03 83 71 03 0005/20/92 20:41:38 from hlink (assoc id=2) Make CallFF 0A 00 1D 02 00 02 08 01 1A 30 08 00 00 35 31 30 39 31 08 00 00 35 31 30 38 3403 0105/20/92 20:41:38 to mlink (assoc id=2) Outgoing ISDN/AP Msg: CONFF 0A 00 28 00 00 00 07 01 00 2C 1E 03 1B 00 00 00 02 16 0E 00 02 00 01 01 00 0000 00 00 00 00 00 00 02 02 9A 15 8A 1505/20/92 20:41:38 from mlink (assoc id=0) Incoming ISDN/AP Msg: CRSFF 0A 00 2E 00 00 00 07 02 00 2C 24 03 21 00 00 00 02 16 0F 00 02 00 01 00 0A 0000 0E 8B 00 00 00 00 02 02 9A 15 8A 15 3D 01 08 3E 01 0805/20/92 20:41:38 to hlink (assoc id=2) ProgressFF 0A 00 25 02 80 02 08 08 00 30 08 00 08 35 31 30 39 31 08 00 08 35 31 30 38 3503 01 2E 04 00 0A 3F 04 0E 8B
