Getting Started General InformationNFS-3030 Programming Manual P/N 51345:C 11/4/03 13Figure 1.4 Change User Password ScreenSoft KeysUSER: Press this soft key to scroll through the nine user password numbers. When this key ispressed, the rest of the display will update to reflect information for each new record. Stop at thepassword number that requires entering.MODE: Press this soft key to select the user’s level of access. Levels are as follows:•PROGRAM/ALTER STATUS Gives access to the Program Change Menu and Alter Status Menu.•ALTER STATUS Gives access to the Alter Status Menu•NONE Gives no access.REFERENCE: Press this key to enter a maximum 20-character alphanumeric label that identifies theuser. Press the enter key on the display/keyboard to enter the information.ENTER PASSWORD - Press to enter a new password. Type in up to eight alphanumerics on thekeyboard, then press enter. RE-ENTER PASSWORD will appear. Retype the password forverification.ACCEPT: After entering all password information and retyping the password at the prompt, press thissoft key to save all the password information.Incorrect or Forgotten PasswordIf a password is entered incorrectly, the panel will respond by displaying an INVALIDPASSWORD message and a code. The programmer may hit the escape key and re-enter thepassword correctly. However, if the password has been forgotten, record the code and contactNOTIFIER. After proper authentication, the master password can be determined by deciphering thecode. An example of the message that would appear on the display follows:C H A N G E U S E R P A S S W O R DU S E R : 1 R E F E R E N C E : J O H NE N T E R P A S S W O R D * * * * * * * *R E - E N T E R P A S S W O R D * * * * * * * *M O D E : P R O G R A M / A L T E R S T A T U S A C C E P TB A C KINVALID PASSWORD:9066-21FS-7D78-5FA4-6163Codewww.PDF-Zoo.com
