Section 7 COPIER MANAGEMENT7-6 Changing copy limits1 Display the “Copy Management” screen. (See page 7-3.)2 Use the M cursor or the N cursor key to select“x Management Setting” [“x COPY MGMT SETTING”].Inch specificationsMetric specifications3 Press the Enter key.4 Use the M cursor or the N cursor key to select “v CopyLimit Correction”.Inch specificationsMetric specifications5 Press the Enter key.6 Use the numeric keys on the keypad to enter the departmentcode that you want to change to copy limit for.Inch specificationsMetric specificationsNOTEIf you want to delete another department code, repeat steps 6 through8.9 Press the Stop/Clear key.The message display will return to the screen in step 4.10 Use the M cursor key to select “z End” and then press theEnter key.The message display will return to the screen in step 2.Inch specificationsMetric specifications11 Use the M cursor key to select “z End” once again and thenpress the Enter key.The message display will return to the “Ready to copy.”screen.Inch specificationsMetric specifications
