Section 6 FUNCTIONS6-21When 2 or 3 transparencies are piled on top of one another, staticelectricity can cause problems. This mode automatically places abacking sheet between the transparencies during copying. You canalso select whether or not to have the image of the original copiedonto the backing sheet.NOTEIf you do not have a Memory Copy Board installed as standardequipment, the optional Memory Copy Board must be installed in yourcopier in order to use this mode.(1) Copying onto the backing sheetWith this setting, after the original is copied onto the transparency, thesame image will be copied onto the backing sheet as well.(The asterisk “∗” in the illustration indicates the transparencies.)(2) Leaving the backing sheet blankWith this setting, the original will be copied onto the transparency butthe backing sheet will be left blank. (The asterisk “∗” in the illustrationindicates the transparencies.)1 Set the transparency film in the multi-bypass tray.NOTES• Fan through the transparencies before setting them.• Up to 25 transparencies can be set on the multi-bypass tray at onetime.• Make sure that paper of the same size as the transparencies hasbeen loaded into a drawer.2 Set the originals to be copied.10. Feeding paper as a backing sheet for OHP transparencies[Transparency + backing sheet mode]
