Section 7 COPIER MANAGEMENT7-281 Status report print out1 Make sure that 11" x 8 1/2" [A4] size paper is loaded in one ofthe drawers.* If a Memory Copy Board is installed in your copier, makesure that 8 1/2 " x 11" or 11" x 8 1/2" [A4 or A4R] size paper isloaded in one of the drawers. (8 1/2 " x 11" and A4R papercan be loaded into the optional Paper Feeder.)2 Press the Enter key.The status report will be printed out.2 Auto drawer switching ON/OFF1 Use the M cursor or the N cursor key to select either “z On”or “x Off”.Inch specificationsMetric specifications2 Press the Enter key.3 Auto shut-off ON/OFF1 Use the M cursor or the N cursor key to select either “z On”or “x Off”.Inch specificationsMetric specifications2 Press the Enter key.4 Special paper location1 Use the M cursor or the N cursor key to select the location(a drawer or the multi-bypass tray) where recycled or specialpaper will be loaded.* The “1 paper” [“SOURCE 1”] drawer is not available induplex copiers.Inch specificationsMetric specifications2 Press the P cursor key. An asterisk ( ) will appear next tothe selected location.If you want to cancel the designation, press the O cursor keyand the asterisk will be deleted.Inch specificationsMetric specifications3 Use the M cursor or the N cursor key to select “End” andthen press the Enter key.
