Section 6 FUNCTIONS6-54 When copying is completed, press the Interrupt key onceagain, and replace the newly copied original(s) with theone(s) removed before. Then, press the Start key.The interrupted copy job will be resumed.Interrupt copying is useful if, during one copy job, you want to copyother originals at different settings. Once the rush job is completed,the interrupted copy job can be resumed at the same settings asbefore.NOTEInterrupt copying cannot be used to make copies in the transparencymode, the transparency + backing sheet mode, the presentationmode, the 2-sided copy modes or the insert sheet modes.1 Press the Interrupt key. The Interrupt indicator will blink.Wait a while until “Interrupt mode OK” [“INTERRUPTMODE.”] is displayed and the Interrupt indicator lightscontinuously.2 Remove the original(s) that were currently being copied andput it (them) aside.3 Set the new original(s) and perform the desired copyprocedure.Inch specifications Metric specificationsInch specifications Metric specifications2. Interrupt copying
