Section 7 COPIER MANAGEMENT7-22¤ Auto color adjustment1 Make sure that there is 11" x 8 1/2 " [A4] paper loaded in oneof the drawers.2 Use the M cursor or the N cursor key to select the imagequality that you want to adjust the color for.Inch specificationsMetric specifications3 Press the Enter key.The “Begin Auto Calibration” [“START AUTO CALIBRATION”]screen will appear.Inch specificationsMetric specifications4 Press the Start key.A PG color pattern will be printed out.Inch specifications Metric specifications) Eject destination1 Use the M cursor or the N cursor key to select either“z Inner Eject” (copy storage table) or “x Side Eject”(copy eject tray).Inch specificationsMetric specifications2 Press the Enter key.⁄ ACS adjustment1 Press the O cursor or the P cursor key to move the cursoron the exposure scale. Move the cursor to the right to makeblack and white copies even if there is a small amount ofcolor in the original, and to the left to have color copies madeeven if there is a large volume of black and white in theoriginal.Inch specificationsMetric specifications2 Press the Enter key.
