5-3Section 5 COLOR COPY SETTINGS3. One-touch image quality adjustmentSelect the image quality, for example “Vivid” or “Calm”, according tothe type of copy image you want.NOTES• This setting is only available with full color copying.• This setting is NOT available in the auto exposure mode.• This setting is NOT available for use together with the color balanceadjustment.• Select one of the 6 available image quality settings. Multipleselections are NOT possible.• Selection is possible between 6 settings: Vivid, Calm, Modulation,Smooth, Light and Heavy. For a sample of copies made under eachsetting, see “Image quality adjustment samples” on page i.1 Press the Color Edit key to light the corresponding indicator.2 Use the M cursor or the N cursor key to select “c QuickImage” and then press the Enter key.Inch specificationsMetric specificationsInch specifications Metric specifications3 Use the M cursor or the N cursor key to select the imagequality setting that you want to use.Inch specificationsMetric specifications4 Press the Enter key. The image quality will be selected andan asterisk ( ) will appear in front of the number for thatsetting.NOTEIn order to cancel the setting, use the M cursor or the N cursor key toselect that setting again and then press the Enter key. The asterisk( ) will be removed and the setting canceled.5 Use the M cursor key to select “z End” and then press theEnter key. The message display will return to the “Ready tocopy.” screen.Inch specifications Metric specifications