Section 7 COPIER MANAGEMENT7-2Procedure Clearing copy counts Printing out the departmentcode list Checking the copy counts Printing out the copymanagement list Turning copy managementON/OFF Turning printing managementON/OFF Turning the printing errorreport print out ON/OFFDescriptionPerform this procedure when you want to clear the copy counts for all of the registereddepartment codes after a designated period of time. Copy counts cannot be clearedindividually, however.Perform this procedure when you want to print out a list of all of the currently registereddepartment codes as well as the copy limit designated for each code.Perform this procedure when you want to check the total number of copies made under alldepartment codes as a whole.Perform this procedure when you want to print out a list of the number of copies made undereach department code.Perform this procedure when you want to turn copy management ON or OFF, as desired.Perform this procedure when you want to turn printing management ON or OFF, as desired,for printing with the optional printer functions of this machine (printing management).* This procedure is only available when the optional Printer Kit is installed in your copier.When printing management is turned ON, you can have a report printed out automaticallywhenever a department code mismatch error occurs. Turn this setting ON if you want thereport printed out automatically, and turn it OFF if you do not want to have the report printedout.* This procedure is only available when the optional Printer Kit is installed in your copier.Referencepage7-77-87-97-107-10––
