Section 4 BASIC OPERATION4-24. Selecting functionsSelect from the copier’s various functions.5. Selecting the paper sizeWhen “APS” appears in the message display, paper of the same sizeas the original will be automatically selected. Thus, if you want tomake copies onto paper of the same size as the originals with imagesof the same size, no special settings are required. If you want to copythe original image onto a different size paper without changing thesize of the image, press the Paper Select key and select the desiredsize of paper, and then press the Manual key.NOTEIt is also possible for you to specify one drawer that will be selectedautomatically even without setting any originals. (See “@ Defaultdrawer (b/w)” on page 7-19 and “# Default drawer (color)” onpage 7-20.)Inch specifications Metric specifications4Inch specifications Metric specifications5• Mono-color mode (Page 5-1.)• Gloss mode (Page 5-2.)• One-touch image quality adjustment (Page 5-3.)• Adjusting the color balance (Page 5-4.)• Adjusting the color hue (Page 5-5.)• Adjusting the sharpness (Page 5-7.)• Enlarging/reducing copies (Page 6-1.)• Interrupt copying (Page 6-5.)• Making duplex (2-sided) copies from various types of originals(Page 6-6.) * 3• Copying two-page originals onto separate sheets (Page 6-9.)• Creating a margin on the copies (Page 6-11.) *1• Making copies with clean edges (Page 6-15.) *1• Inverting black and white AND colors (Page 6-17.)• Making mirror image copies (Page 6-18.)• Printing page numbers on copies (Page 6-19.) * 1• Feeding paper as a backing sheet for OHP transparencies(Page 6-21.) * 1• Preparing presentation materials to go with transparencies(Page 6-23.) * 1• Adding covers and separation inserts to your copy sets(Page 6-26.) * 1• Making one copy from either two or four originals(Page 6-32.) * 1• Making booklets, etc., from sheet originals (Page 6-34.) *3• Making booklets, etc., from books (Page 6-36.) *3• Making both black & white AND color copies at the same time(Page 6-38.) * 1• Enlarging the image and printing it out onto multiple sheets(Page 6-39.) * 1• Copying different sized originals onto one size of copy paper(Page 6-41.) * 1• Memorizing frequently used settings (Page 6-43.)• Confirming copy settings (Recall function) (Page 6-45.)• Sorting automatically (Page 6-46.) * 1• Rotate copy function (Page 6-47.) * 1• Auto selection mode (Page 8-3.) *2*1: If you do not have a Memory Copy Board installed asstandard equipment, the optional Memory Copy Board mustbe installed in your copier in order to use this mode.*2: The optional DF must be installed in your copier in order touse this mode.*3: Only available in duplex copiers.
