Section 6 FUNCTIONS6-41With this mode, when you are copying from different sized originals,you need only separate the originals by size group and then scanthem all in order to have all of the originals copied onto the samepaper size.NOTES• If you do not have a Memory Copy Board installed as standardequipment, the optional Memory Copy Board must be installed inyour copier in order to use this mode.• If your machine is a duplex copier, it is possible for you to makeduplex (2-sided) copies in this mode.• Originals can be scanned from both the DF and the platen incombination.1 Press the Auto Selection/Filing key to light the correspondingindicator.The “Select function” screen will appear.18. Copying different sized originals onto one size of copy paper[Filing mode]2 Use the M cursor or the N cursor key to select “x Filing”.Inch specificationsMetric specifications3 Press the Enter key.4 Use the M cursor or the N cursor key to specify the type oforiginals being copied.Select “z 1-sided” if you are using 1-sided originals and“x 2-sided” if you are using 2-sided originals.Inch specificationsMetric specifications5 Press the Enter key.• If your machine is a duplex copier, go to the next step.• If your machine is a standard copier, go directly to step 8.6 Use the M cursor or the N cursor key to select the type offinished copies you want to make.Select “z 1-sided” if you want to make 1-sided copies and“x 2-sided” if you want to make 2-sided copies.Inch specificationsMetric specificationsInch specifications Metric specifications
