Section 6 FUNCTIONS6-36With this mode, you can use open-faced originals (books, etc.) tomake open-faced two-sided copies in such a way that the finishedcopies can be stacked and folded into a booklet format.NOTES• This mode is only available in duplex copiers.• If the number of originals is not a multiple of four, the last page(s) ofthe copies will come out blank.• 2-sided copies cannot be made automatically when paper is beingfed from the multi-bypass tray.1 If “Right” is selected as the page sequence…Copying will be performed so that the stacked and folded pages ofthe finished copies read from right to left.2 If “Left” is selected as the page sequence…Copying will be performed so that the stacked and folded pages ofthe finished copies read from left to right.15. Making booklets, etc. from book originals [Book to Book mode](Only available in duplex copiers)1 Press the Book Mode key to light the correspondingindicator.2 Use the M cursor or the N cursor key to select “z Booklet”and then press the Enter key.Inch specificationsMetric specifications3 Use the M cursor or the N cursor key to select “x Book-Book” [“x BOOK>BOOK”] again and then press the Enterkey. The “Select copy stitch side” [“SELECT COPY BINDINGSIDE”] screen will appear.Inch specificationsMetric specificationsInch specifications Metric specifications
