116 Chapter 6 Ensure the best output qualityOptimise the output quality on the printerOptimise the output qualityOptimise the output quality on the printerIntroductionThis section describes different methods that you can use to optimise the outputquality on the Océ TCS300 printer.Problem analysis and solutions[51][51] Problem analysis and solutions (1 – 2)Problem Method ofanalysisSolutionsThe output colouris not the same asthe original colour'Quality check'print■ Use the correct colour managementsettings for the original. Choose OcéCAD colours for CAD/vectordrawings or Océ Enhanced colourswith the optimal rendering intentsfor posters, images, etc.■ Make sure you define the correctsoftware settings, for example thecorrect pen settings.■ Use the 'Release' quality mode fordrawings.The length andwidthmeasurements aredifferent from theoriginal'Quality check'print■ Make sure you defined the correctscale settings■ Use the 'Presentation' quality mode■ Use the 'Optimise print quality'wizard to correct the problem.■ In case of a media length deviation,adjust the setting 'Cut lengthcorrection'. Navigate to 'Support' -'Media' in the Océ Settings Editorand access the edit window of aselected media type.■ In case of an image length deviation,navigate to 'Preferences'- 'Systemdefaults' - 'Calibration' and selectthe value 'Size accuracy' for thesetting 'Vertical print optimisation'.
