67Set up unattended / overnight printing optimisationSet up unattended / overnight printing optimisationIntroductionThe Océ TCS300 has the possibility to print unattended, for example outside officehours. To use this option, navigate to 'Preferences'- 'System defaults' - 'Calibration'to change the setting 'Overnight printing optimisation' in the Océ Settings Editor.When the setting 'Overnight printing optimisation' is set to 'On', the system willautomatically perform checks, after the selected number of prints, to ensure aconsistent output quality. For each check, the system uses approximately 25centimetres of the loaded media roll.Set up overnight printingThe setting 'Overnight printing optimisation' has the following options.[26]Calibration is only possible when one of the following media types (minimal mediasize is A0) is loaded on the system. If you use another media size or a media type notmentioned in the list below, the system will display an error message.■ Draft paper■ Standard paper■ Premium coated paper■ Bond■ Coated bond■ Matt photo paper■ High gloss photo paper■ Deluxe bond■ Recycled plain paper■ Plain paper coatedNote: When these media types are not available on the system, the check is delayeduntil the next time a print is made on one of these media types.Setting Function'Off' The system will not check the output quality.'On'Recommendedvalue: 100The system checks for failing printhead nozzles and corrects thealignment.You can define the number of prints after which the systemautomatically does a check.
