74 Chapter 5 Print jobs to the Océ TCS300Stop or delete an active jobStop or delete an active jobIntroductionThis section describes how to 'Stop' or 'Delete' an active job on the printer operatorpanel.How to 'Stop' or 'Delete' an active print job on the printer operator panel1. Press the 'Stop' key on the printer operator panel.The printer stops immediately.A dialogue box on the screen asks the user to 'Resume' or 'Stop' the job.When you do not select an option, the printer automatically continues the printingafter 5 minutes.[41]2. Use the lower softkeys to indicate if you want to 'Resume' or 'Stop' the job.3. If you select 'Resume' the printer continues to print the job.4. If you select 'Stop' the active job is permanently deleted.Note: When you delete a job, the drying is not skipped. Press the key for 'Skipdrying' to cancel the drying during the drying time. You can use the 'Feed & cut'wizard to cut the output.
