75Define the correct media for your jobsHandle the media for the print jobsDefine the correct media for your jobsDefinitionTo achieve optimal output quality, make sure that you load and define the correctmedia type on the printer.You can use the 'Change media type' wizard, to load a media roll and to change themedia type defined on the system.Make sure you define the correct media type for your job. Make sure the media typeand the media format defined in your job is available on the printer.Define the correct media on the printer and the correct settings in the job submissiontools to set the Océ TCS300 for productive use or high output quality.[28]Note: The above procedure is based on DIN media sizes. You can also use thisprocedure with ANSI media sizes.When productivity with different media sizes is the most importantrequirement.1 Load and define 2 or 3 media rolls on the printer with different media sizesand the same media types.2 Use the 'Landscape' orientation to print a job on a media size that is onesize smaller than the media defined on the system. For example, A1 printsin landscape on A0 and A2 prints in landscape on A1. You are not requiredto cut the media by hand.3 Use the 'Auto rotate' setting in the Océ Settings Editor or the jobsubmission tools to rotate the orientation automatically.
