137Replace the media1. Press the On-line / off-line key to set the printer off-line.2. Use the upper softkeys to scroll to the 'Change media type' card.[77][77] Change media type card on the off-line screen3. Press the softkey below the 'Change media type' card to enter the wizard.4. An introduction screen displays the message 'Use the retract button to replace a roll.Press Next to change the media type for a loaded roll.'[78][78] Introduction screenWhen you do not want to load a new roll, use the upper right softkey to continue thewizard at the introduction screen. When you do want to load a new roll, press theretract button to change the media roll.5. When you press the retract button, the screen displays the message 'Load newmedia'. Change the media roll as described in the above sections.6. When you do not press the retract button and continue in the 'Change media type'wizard, the screen displays the message 'Select roll to change media type for...'. Usethe lower softkeys to select the correct roll to change the media type for.[79][79] Select a roll to change the media type.
