70 Chapter 5 Print jobs to the Océ TCS300What you need to know before you send your print jobsWhat you need to know before you send your print jobsDefinitionBefore you send print jobs to the Océ TCS300, remember the following.■ The values defined in the Océ Settings Editor are default values for the generalsystem behaviour. You can define a number of job settings in the printer driversor the job submission tools. The settings defined in the printer drivers or the jobsubmission tools always overrule the settings defined in the Océ Settings Editor.■ Make sure that you define the correct quality mode for your job (see ‘The qualitymodes’ on page 83).■ Make sure that you define the correct media type for your job (see‘Recommended media types and quality modes’ on page 85).■ Make sure that you define the correct job settings. For example, orientation,rotation, and media type.Note: When the requested media type is not available on the printer, the printer willgive a media request. Depending on the 'Media request time-out' settings in the OcéSettings Editor ((see ‘Configure the 'Media request time-out'’ on page 63)), theprinter waits until the media is loaded or the print job will be deleted after thetime-out has expired.
