4 Reception4-4 im7520/im6020Reception Chapter 44.3 Manual Reception (Telephone Only Mode)Manual Reception (Telephone Only Mode)FAX messages can be received manually when Receive mode is set toManual RX in Telephone Line Settings of Utility Mode. An external telephonemust be connected to receive FAX messages manually.Refer to "Telephone Line Settings" on page 11-30 for setting manualreception.Refer to the following for procedure of manual reception.1 Press [Off-Hook] when the external telephone rings.2 Make sure that [RX] is highlighted.– If a document is present in the ADF or the platen glass, RX will notbe highlighted even if there is an incoming call. In this case, pressRX to highlight the display.3 Press [Start] on the Off-Hook menu.– Pressing [Start] on the control panel open the Off Hook screen.Transmission starts when you press [Yes].Reception begins.Arrival of a callExternal telephone ringsLift the handset and start talkingFor FAXES, press [Start] to receive.
