Polling 9im7520/im6020 9-5Polling Chapter 99.2 Polling ReceptionPolling reception enables the FK-502 to send a command to a destination toreceive the document that is either set for transmission on the remotemachine or reserved for polling transmission. This function is convenientwhen you prefer to bear the telephone charge instead of the destination.You can designate two or more destinations for polling reception by usingsequential polling reception.A sequential polling reception result report prints out upon completion ofsequential polling reception. A sequential Polling RX reservation report printsout when Timer TX is also used.!DetailIt may be unable to be used with the other party machine.Refer to "Sequence Polling RX Reservation Report" on page 12-26 and"Sequence Polling Reception Report" on page 12-16 for information onthe Sequential Polling Reception Reservation Report and SequentialPolling Reception Result Report.Polling ReceptionPolling reception has two options: one is ordinary polling reception, and theother receives the document reserved in the bulletin board of the destination.The description below assumes the ordinary polling reception. For the latter,see "Receive by Polling a Document Written to the Bulletin Board of aDestination (FAX)" on page 9-9.0Functions incompatibleFrame Erase, Scan SIze, Mixed Original, Z-Folded Original, LongOriginal, Bind Position, Confidential TX, Relay TX Req, ECM OFF,Overseas TX, Polling TX (Normal), Password TX, V.34 OFF, SeparateScan, Bulletin Board Registration, Polling RX (Bulletin)1 Press [Fax] on the control panel to view the FAX screen, if it is notalready displayed.2 Press [Comm. Setting].
