11 Utility Mode11-64 im7520/im6020Utility Mode Chapter 1111.16 Set the Multi Lines SettingSet the items for the additional line.2 NoteThe Multi Line Setting can be set only when 2 lines are used.Telephone Line SettingSet the parameter for the additional line.* indicates factory default setting.1 Open the Administrator Setting screen (See "Entering AdministratorSetting" on page 11-3).2 Press [Fax Setting].Item Description Available valueTelephone Line Set-tingDialing Method Set the dialing method forthe Line 2 (additional line).PB * / 10ppsNumber of RX CallRingsSet the arrival frequencyfor the Line 2 (additionalline). Set the pseudo ringback tone frequency afterthe arrival until receiving isstarted.0-15 (2 times* )Line Monitor Sound To hear the sound on theline from the speaker at thetime of transmission withthe Line 2 (additional line),set it to ON.ON / OFF *Line Monitor SoundVolumeSet the sound volume ofthe speaker.0-31 (16 *)