Transmission Applications 7im7520/im6020 7-53Transmission Applications Chapter 77.20 Sending after the check of destinationWhen you specify the destination and press the [Start] button, the CheckDestination screen and the number of cases appear. Sending after thedestination check prevents erroneous transmission due to incorrectdestination.!DetailTo use the Destination Check Display function, you should set theDestination Check Display function to ON at the time of the FunctionON/OFF Setting. Refer to page 11-36 for more information on the settingof the Destination Check Display function.1 Press [Fax] on the control panel to view the FAX screen, if it is notalready displayed.2 Set [Scan Setting], [Comm. Setting] if necessary.3 Designate the destination.– See "Selecting One Destination" on page 3-19 for informationabout designating the destination.4 Set the original document.– See "Placing Originals on the Platen Glass" on page 3-6 forinformation about setting the document.5 Press [Start].Check Destination screen appears.6 Check that a correct destination is specified and press the [TX] or[Start] button.
