Transmission Applications 7im7520/im6020 7-41Transmission Applications Chapter 77.15 Relay Transmission Request (F-Code TX)Relay transmission request is the bridging of transmissions to severaldestinations via an intermediate (relay) station. If the destinations to whichyou intend to transmit are far, this function allows you to cut down thecommunication costs. You can organize groups of stations, each of whichconsists of one relay station and several destinations.!DetailTo use this machine as an intermediate relay station, the Relay User Boxshould be registered by setting the [Relay RX] to ON in the FunctionON/OFF Setting in the Utility Mode. For more information, refer top. 10-53 and p. 11-36.By setting the [Relay Print] of the Function ON/OFF Setting to [ON] at theintermediate relay station, a document relayed after the relay distributionis printed. Refer to p. 11-36 for more information.Relay Transmission Request0SpecificationsRelay TX Req can be used only when the Relay TX Req feature is enabledin the Utility Mode. For details, see "Function Setting" on page 11-36.We define the originating station as that which issues a relay request, therelay station as that which relays transmissions, and the terminatingstations as that which receive and terminate communications.To use Relay TX Req, a Relay Box No., relay password and destinationgroup No. must be defined at the relay station.Relay TX Req can be used only when the relay station incorporates theF-code feature.Originating StationTerminating StationTerminating StationIntermediate relay stationToll callLocal call
