Before Use 2im7520/im6020 2-23Before Use Chapter 22.7.3 Operations of the PC-FAX RX feature!DetailFor details, see "PC-FaX RX Setting" (p. 11-48).When setting the PC-FAX RX feature or TSI User Box Setting, documentsreceived are saved in the Memory RX User Box (Box No.0) or Public/PersonalUser Box (Box No.1 to 999999999) in the hard disk.The box into which documents received are saved is set in [PC-Fax RXSetting] of the Utility Mode. For the relationship between [PC-Fax RX Setting]and the reception method, see the table below.[PC-Fax RX Setting] of theUtility ModeReception methodPC-Fax RX Setting: OFF Documents received are not saved in the box, but printed imme-diately.In the following cases, however, documents received are saved inthe box.1. In the case of the Confidential RX or Relay Request RX(When the sub-address in the F-code is representing a numberfor the Confidential User Box or Relay User Box):The reception documents are saved in the Confidential User Boxor Relay User Box regardless of the setting of the PC-FAX RX fea-ture.When the sub address is different from a number for each box, orthe password of the F code is different from a communicationpassword for each box, a communication error results.2. When TSI User Box Setting is set to ON:Documents received are stored in the box set by TSI User BoxSetting.3. When the Memory RX is set to ON:When not corresponding to 1. or 2. above, documents receivedare saved in the Memory RX User Box.PC-Fax RX Setting: ONRX Output: Memory RXUser BoxDocuments received are saved in the Memory RX User Box.In the following cases, however, documents received are saved ina different box.1. In the case of the Confidential RX or Relay Request RX(When the sub-address in the F-code is representing a number forthe Confidential User Box or Relay User Box):Documents received are saved in the Confidential User Box re-gardless of the setting of the PC-FAX RX feature. When the subaddress is different from a number for each box, or the passwordof the F code is different from a communication password foreach box, a communication error results.
