Utility Mode 11im7520/im6020 11-9Utility Mode Chapter 1111.2.10Administrator Setting >> Fax Setting >> Function SettingTurns ON/OFF transmission/reception functions. (page 11-36)Item Description Available valueFunction ON/OFF SettingF-CodeTXFor details, see "Turning ON/OFFtransmission/reception functions" (p.11-36).ON * / OFFRelay RX Broadcast the document receivedfrom the originating station as an in-termediate relay station to the termi-nating station. To use the Relay RXfunction, the Relay User Box shouldbe registered.ON * / OFFRelayPrintPrint the document received from theoriginating station.ON / OFF *Destina-tionCheckDisplayFunctionSet whether or not to display the listof destinations specified at the timeof facsimile transmission.ON / OFF *Memory RX The memory reception is the functionused to receive documents and storein memory so that you can print themout later as necessary.ON / OFF *Closed Net-work RXThe closed area reception is thefunction used to receive the incom-ing data only when the sender'spassword is valid.ON / OFF *Set a password in 4 digits.Forward TXSettingThe Fax transfer is the function usedto transfer the received data to a cer-tain station determined in advance.OFF * / Forward & Print /Forward & Print (If TX Fails)Forward Dest.Incomplete TXHoldDocuments which could not betransmitted by the auto redial func-tion because of a communication er-ror or busy remote station is savedtemporarily in the Fax RetransmitUser Box.ON / OFF *When the Incomplete TXHold is set to ON, specifythe Incomplete TX HoldTime.PC-Fax RX Set-tingThe PC-Fax RX Setting feature offersa procedure for saving files contain-ing received faxes in Boxes on thehard disk.By setting to ON the PC-Fax RX Set-ting function, you can set up whetheror not to print the data received andset up the Communication Pass-word.This is not displayed if the optionalhard disk is not installed.OFF * / ONMemory RX User Box /Specified User BoxSave & Print (ON / OFF * )Communication Password(ON / OFF * )
