3 Transmission3-30 im7520/im6020Transmission Chapter 33.6 When Unable to SendIf transmission cannot be done due to the receiver being busy or for someother reason, the redial function can be used for the transmission.The redial function of this machine includes the auto redial function, manualredial function and Fax Retransmit function.!DetailAddress cannot be changed by the auto redial function nor the manualredial function.Refer to p. 5-2 if transmission cannot be still effected by redialing due toa line trouble or for any other reason.RedialingRedialing refers to dialing the number of the same destination again.If a facsimile cannot be sent due to a busy signal from the receiving machineor for some other reason, the machine redials the number after apredetermined amount of time has elapsed. During that interval before thenumber is redialed, the transmission document is treated as a reserveddocument waiting to be sent.Auto Redial functionIf the transmission is not effected due to the receiver being busy, etc., theaddress is automatically redialed according to the [Number of Redials] whichhas been set to the Telephone Line Settings.!DetailThe redialing function is set at factory to redial one time after a three-minute interval. The number of redials and the redialing interval can bechanged in the Utility Mode. For details, see "Telephone Line Settings"on page 11-30.
