Utility Mode 11im7520/im6020 11-59Utility Mode Chapter 1111.14 Report SettingsYou may select the Report Settings to be On or Off. This settings prints thereports of communication management, communication result and reserva-tion. If ON is selected, the manner of printing may also be selected.* indicates factory default setting.!DetailWhile in the selection of [1 Dest. at time], the output of the BroadcastResult Report is restricted only when a redial is tried with no successfultransmission available. When a transmission is terminated normally, noreport is issued.When selecting [ON] in "TX Result Report Check", the TX Report will beprinted if YES is selected. The report will not be printed if NO is selected.Item Description Available valueActivity Report Determines whether to print the report andthe timing at which the report will be printedout.OFF / Daily / Every 100Comm.* / 100/DailyWhen you set the outputof Activity Report to [Dai-ly] or [100/Daily], you canalso set the time to out-put the report.TX Report ON / If TX Fails* / OFFSequential TXReportON * / OFFTimer Reserva-tion TX ReportON * / OFFConfidential RXReportON * / OFFBulletin TX Re-portON * / OFFRelay TX ResultReportON * / OFFRelay RequestRX ReportON * / OFFPC-Fax TX Er-ror ReportON / OFF *Broadcast Re-sult ReportSet up the Broadcast Result Report printingmethod.All Dest. * / 1 Dest. at atimeTX Result Re-port CheckDetermines whether to display the trans-mission result report select screen. If youselect [ON], it will be displayed after eachtransmission.OFF * / ON
