23Note: Be sure the paper is under the tabs at the left and rightedges of the cassette. Do not fill past the Paper Fullmarker. If necessary, readjust the guides for a snug (butnot tight) fit.7. Return the tray to the slot. Push it forward until it locks.Setting Time & DateFollow these instructions to set the time and date on your faxmachine.1. Press the Select Function key.2. Press the 9/User Prog. One-Touch key.3. On the numeric keypad, press 3. The display will show3:CLOCK ADJUSTMENT.4. Press the YES key. The display will show the currently setdate and time.5. Using the numeric keypad, enter the new date and time.6. Press the YES key to confirm your entry.7. Press the Select Function key to finish.Setting Answering ModeYour fax machine has a number of answering modes, whichdetermine how it handles incoming calls (both fax and voice).The current answering mode appears on the LCD panel of yourfax machine.Answering Mode OptionsThe answering mode which is best for you will vary dependingon how you use your fax machine and what external telephonedevices are connected to it. Read through the answering modeslisted here, then follow the instructions below.Auto Receive Mode [FAX]If your fax machine is connected to a telephone line reservedonly for fax communications, use the Auto Receive mode. Yourfax machine will assume all incoming calls are fax messagesand automatically receive all incoming fax messages.Manual Receive Mode [TEL]If you use the same line for both fax and telephone calls and themajority of your incoming calls are telephone calls, then theTEL answering mode is your best choice. Each time someonecalls, your fax machine rings like a telephone. You can answerfrom either an external handset or from an external telephoneconnected to your fax machine. If you pick up the handset andhear fax machine CNG tones (normally a short peep every threeseconds), press the Start key to receive the fax. If you do notSELECTFUNCTIONUSERPROG.9/OP DEF33:CLOCK ADJUSTMENTYES ( ) NO( /1-9) YES