901. Press the Number keys to insert either text or numbers.Press them repeatedly to enter the character desired.2. To jump to the next field, use the orkey.3. Press the Start key to enter your settings.Restrictions• If DNS has not been set, enter the IP address of the server.The address must include the “.” (period) dividers (e.g.,192.168.4.123).• Up to 64 characters may be entered.• You may use Latin letters, numbers and symbols.• To enter symbols, use either one-touch keys or key “0” of thenumeric ten-key pad.• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?· @ ? ” _ % ~• The “~” (tilde) symbol shows on the display as “ -1 ”.• The ” and ’ symbols cannot be used.• Both uppercase and lowercase letters can be used. Tochange the case, press the 1/CAPS key.Pop User IdEnter the user ID registered on the POP3 server.1. Press the Number keys to insert either text or numbers.Press them repeatedly to enter the character desired.2. To jump to the next field, use the orkey.3. Press the Start key to enter your settings.Restrictions• Up to 16 characters may be entered.• You may use Latin letters, numbers and symbols.• To enter symbols, use either one-touch key 20 or key “0” ofthe numeric ten-key pad.• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?· @ ? ” _ % ~• The “~” (tilde) symbol shows on the display as “ -1 ”.• Both uppercase and lowercase letters can be used. Tochange the case, press the 1/CAPS key.Pop Password1. Enter the password registered on the POP3 server, whichmust be alphanumerical characters of no more than 16characters long.2. If a password has already been entered, it is shown asXXXXXXXXXXXXXXXX (sixteen Xs).3. Press the Number keys to insert either text or numbers.Press them repeatedly to enter the character desired.4. To jump to the next field, use the orkeys.YES NOYES NOYES NO
