915. Press the Start key to enter your settings.Restrictions• Up to 16 characters may be entered.• POP USER ID and POP PASSWORD settings in the faxmachine must match the POP3 user name already entered inthe server.• You may use Latin letters, numbers and symbols.• To enter symbols, use either one-touch keys or key “0” of thenumeric ten-key pad.• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ?· @ ? ” _ % ~• The “~” (tilde) symbol shows on the display as “ -1 ”.• The ” and ’ symbols cannot be used.• Both uppercase and lowercase letters can be used. Tochange the case, press the 1/CAPS key.DNS P.SRV AddressDNS = Domain Name Service.P.SRV = Primary Server.• Sets the IP address of the DNS primary server.• Do not change this setting if the server is connected directlyusing its IP address.DNS S.SRV AddressDNS = Domain Name Service.S.Serv = Secondary Server.• Sets the IP address of the DNS secondary server.• Change this setting only when a secondary server has beenset up.FAX Email Address1. Enter the email address assigned to your machine. Press theNumber keys to insert either text or numbers. Press themrepeatedly to enter the character desired.2. To jump to the next field, use the orkey.3. Press the Start key to enter your settings.Restrictions• Up to 64 characters may be entered.• You may use Latin letters, numbers and symbols.• To enter symbols, use either one-touch keys or key “0” of thenumeric ten-key pad.• The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ? ·@ ? ” _ % ~• The “~” (tilde) symbol shows on the display as “ -1 ”.• The ” and ’ symbols cannot be used.• Both uppercase and lowercase letters can be used. Tochange the case, press the 1/CAPS key.I-Fax NIC InitializeThis resets the Network Card to its original factory settings.Verify that you want to do this before proceeding because whenYES NO
