393. Press the YES key to erase the message from the memory ofyour fax machine.Rejecting Unsolicited Fax MessagesThe closed network option allows you to limit the locations withwhich your fax machine can communicate. Using this function,you can set your fax machine to refuse to receive any faxes fromlocations whose telephone numbers are not programmed intoyour One-Touch keys or Auto Dial numbers. This functionallows you to reject any unsolicited faxes such as advertising.Note: In some countries, this function cannot be set by the user.Please contact your dealer for assistance.You can also set your fax machine not to send faxes to locationswhose telephone numbers are not programmed into your One-Touch keys or Auto Dial numbers.The available settings are:• Limit Reception Only (RX)• Limit both Transmission and Reception (T/R)• No Limitation on Transmission or Reception (OFF).Follow the instructions below to set the parameters desired.1. Press the Select Function key.2. Press the 9/User Prog. One-Touch key. The display shows1:FUNC. PROGRAMMING.3. Press the YES key. The display shows FUNCTION NO. [ ].4. Using the numeric keypad, enter 08. The display shows08:CLOSED NETWORK, and the current setting of thisfunction.5. Press the NO key until the setting you want appears in thedisplay.6. Press the YES key to confirm the new setting then press theSelect Function key to finish.Power Failures & MemoryAlthough the memory is backed up by battery (about 20 hourswhen the battery has been fully charged and the temperatures arenormal), the following problems occur when power is cut off forlengthy periods of time.• Any messages your fax machine has scanned into memory,but not yet transmitted, are lost.• Any messages your fax machine has received into memory,but not yet printed, are lost.• If you have loaded documents onto the document feeder ofyour fax machine, any dialing or transmission settings arelost.Your fax machine prints a power outage report to inform you of apower failure. Use this report to determine which receivedmessages you may have lost and which transmissions you maySELECTFUNCTIONUSERPROG.9/OP 08: CLOSED NETWORK0YESTUV8